STOCK COLORS: Black, Silver-Grey, Tan, Red and Blue. The CURVE System (all 42" long custom lengths available):ĭiffusors: (all with MLV membrane - absorbs 40-200Hz / diffuses 200-20kHz)Ībsorber: 21" W x 4.5" D (absorbs 200-20kHz)Ĭorner Trap: 21" W x 18" D (Medium diffusor with corner trap - absorbs 40 - 300Hz / diffuses 200 - 20kHz) Mounting cleats and hardware included for easy installation.No fiberglass or foam uses safe, "Green" absorbent lining (recycled cotton).Diffusor and Corner Trap act as diaphragmatic low to mid frequency absorbers.The Corner Trap reduces low frequency corner room modes.The Absorber evenly absorbs frequencies from 200 - 20kHz.The Diffusor reduces narrow reflections and frequency dependent modes eliminates parallel surface flutter echos includes MLV membrane bass trap.42" length allows for vertical stacking and alternating vertical / horizontal orientation on walls and ceilings alternating different avoids comb filtering artifacts.Professionally attractive, with many fabric, color and finish options.Acts as a diaphragmatic absorber in the mid-bass band.Includes a limp-mass MLV membrane bass trap to control low-bass room modes. ![]() Does not exhibit phase-grating (quadratic residue) diffusor artifacts - no phase or frequency distortion, no high frequency limitations, no internal edge diffraction.See our CURVE Combinations Guide for the best way to set up your room, or contact an CURVE System specialist at Cascade Audio Engineering. The right combination and placement of the CURVE System components will optimize your acoustic spaces and because of their coherent design, all CURVE models look great together. Three stock diffusor widths integrate perfectly with two matching models, the CURVE Absorber (mid to high frequency absorption) and the CURVE Corner Trap (an CURVE Diffusor with an additional corner bass trap). It solves the two biggest acoustical issues which are diffusing mid to high frequencies and controlling low frequencies. The CURVE diffusor also acts as a diaphragmatic mid bass absorber and includes a built-in mass loaded vinyl (MLV) membrane low frequency trap. These have been proven to minimize flat surface refelction problems by broadly and evenly scattering sound energy. The core of the CURVE system is the innovative diffusor, an improved version of the classic polycylindrical designs used in recording, broadcast and film studios since the 1930's. ![]() The CURVE System was created as a simple, accurate and affordable way to achieve natural sounding acoustics. The CURVE System - simple, accurate, affordable acoustics.Īfter a century of acoustical research, it's widely agreed that room with the right balance of diffusion and absorption are far more natural sounding and source accurate than rooms without proper diffusion or with too much absorption.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |